designing-for-injection-molding

Help Guide

Injection Moulding Design Guide

Injection moulding produces high quality parts by forcing heated thermoplastics into a mould cavity to create the desired component. Quickparts provides traditional injection moulding services, with capabilities ranging from prototype through production quantities, multi-cavity tooling, tight tolerances, over-moulding and secondary post-moulding operations.

Download this guide to learn all the design considerations for plastic parts using injection molding.

We offer most commercially available thermoplastics from production-grade tooling, with no geometry limits and have a large variety of solutions and benefits to meet your needs.

  • Production grade tooling for up to 50K parts
  • Standard lead time 2-4 weeks for T1 samples
  • No limitations on side actions
  • Part sizes up to 1524mm long
  • Variety of polishing and texturing capabilities
  • Fast and dependable service
  • Free Design for Manufacturing Analysis (DFM) with each quote

Advantages:

  • ISO 9001 certified facilities
  • Class 103 to 105 injection tooling
  • Certified P20 Steel, H13 and stainless steels
  • In-house tooling trial capabilities ranging from 40 ton to 3000 ton molding presses
  • Fully automated tooling with slides, lifters & standalone tool bases
  • Pilot and short run production available upon tooling completion
  • Secondary assembly and painting options available
  • PPAP and process capability studies
Fill out this quick form to get access to your copy