What is Stereolithography?

Utilizing a vat of liquid photopolymer resin cured by an Ultraviolet laser to solidify the pattern layer by layer, SLA printing produces high-quality prototypes and parts.

Using SLA printing, Quickparts can address a wide variety of rapid manufacturing applications with many different materials and finishes, making it the most versatile 3D printing option we offer.

Order Your Parts Today

General

Appearance and proof-of-concept prototypes
Design evaluation models (form and fit)
Design verification models
Wind tunnel test models

Tooling and Patterns

Investment casting patterns
Jigs and fixtures
Cast urethane/vacuum
Costing master patterns

Biocompatible Materials

Surgical tools/guides
Dental appliances
Hearing aids

Materials

Accura 25 (ABS/PP-Like)
Accura Xtreme White
Accura Xtreme Grey (High-Impact ABS-Like)
Accura SL 7820 Black (ABS-Like)
Accura 60 (PC-Like)
Accura ClearVue (PC-Like)
Accura Bluestone (High-Temp ABS-Like)
Accura 48 (High-Temp PC-Like)

Finishes

Natural
Remove supports, wash and post cure. (No sanding performed)
Standard
Remove supports, wash, post cure, sand areas where supports were attached with 320 grit sandpaper, sandblast with 320 grit aluminum oxide sand
* Note: ABS Black parts may receive an additional coating
Paint-Ready
Standard Finish plus remove all build/layer lines on the visual (cosmetic) surfaces with 320 grit sandpaper, sandblast with 320 grit aluminum oxide sand, apply primer to all surfaces and sand with 600 grit sandpaper (build/layer lines will be visible on non-cosmetic surfaces
Painted
Paint-ready finish with your specified paint color applied
Quick Clear
Standard finish with clear coat applied
Clearpart
Remove all build/layer lines from all surfaces with 400 grit sandpaper and apply clear coat
Custom
To your specifications